We offer free diagnostic estimates and repair all makes and models of bicycles. Appointments are encouraged, which can reduce the amount of time you are without your bike. Simply stop by or call the shop to reserve a slot.

A wide range of service options are available and specifically 'tuned' to work for you and your bike. Below is a sampling of our standard tune up options that are available.

Overhaul L3.1 $225

Absolutely, top of the line service returning the bike to a nearly ‘like new’ running condition. Essentially, the entire bike is striped of all parts, cleaned, lubed and reassembled.

• Remove all parts from the frame and fork.
• Clean wheel rims, spokes, hubs, brake calipers, drive train (chain, chainrings, cassette/freewheel) and frame. Polish frame and fork. Disassemble parts where appropriate. Re-grease and assemble.
• Lube brake/shift levers, brake/shift cables, brake caliper pivot points, brake caliper posts, headset, bottom bracket, derailleurs, chain, cassette, and chainrings. Trim brake and shift cables, secure with cable ends.
• Correct lateral, radial, centering, tension average and tension balance errors in both wheels.
• Adjust front and rear wheel hubs, headset, bottom bracket, pedals (if serviceable), brake pads (center and balance clearance), shift levers, front and rear derailleurs.
• Secure/tighten brake/shift levers, brake calipers, handlebars, stem, seatpost, seat, crankarms, chainrings, pedals, and accessories.
• No additional labor charges for new parts installation.

Major Tune Up L2.1 $90

Recommend a major tune up if the bike has been ridden frequently, especially in wet weather. Consider new cables and housing at this time as there is no additional service charge for installation.

• Remove chain, cassette/freewheel, chainrings, and derailleurs.
• Clean wheel rims, spokes, hubs, brake calipers, drive train (chain, chainrings, cassette/freewheel) and frame.
• Lube brake/shift levers, brake/shift cables, brake caliper pivot points, brake caliper posts, derailleurs, chain, cassette, and chainrings. Trim brake and shift cables, secure with cable ends.
• True front and rear wheels laterally, so brakes can be properly adjusted.
• Adjust front and rear wheel hubs, headset, bottom bracket, brake pads (center and balance clearance), shift levers, front and rear derailleurs.
• Secure/tighten brake/shift levers, brake calipers, handlebars, stem, seatpost, seat, crankarms, chainrings, pedals, and accessories.
• No additional labor charges for cables, housing, chain and cassette replacement.

Basic Tune Up L1.1 $60

Great value if your bike has little use over the past few years and just needs a 'freshening up' to get it ready for in season riding.

• Adjust front and rear wheel hubs, headset, bottom bracket, brake pads (center and balance clearance), shift levers, front and rear derailleurs.
• Secure/tighten brake/shift levers, brake calipers, handlebars, stem, seatpost, seat, crankarms, chainrings, pedals, and accessories.
• Lube brake/shift levers, brake/shift cables and derailleurs. Trim brake and shift cables, secure with cable ends.
• True front and rear wheels laterally, so brakes can be properly adjusted. Wipe down frame.

Your comfort, efficiency, and performance on your bicycle are too important to trust to the new guy on the block. Our fitting staff has nearly a decade of bicycle fitting experience, serving thousands of clients of varying levels. Recreational riders to elite racers have found a new level of enjoyment and performance after visiting our expertly trained fitters.

Sunset Cycles' fitting methodology has been refined over the years to include the finest aspects of some of the most well respected bicycle fitting systems in existence. We focus on Specialized's Body Geometry System, but include philosophies from other well-established systems. Our multi-faceted approach is balanced and more likely to present you with results that you'll notice and enjoy than the pre-packaged fitting-system-in-a-box approach which has become so prolific. If you have questions or would like to schedule an appointment don't hesitate to contact us.

BG Advanced D.A.T.A. Fitting: $250 + Parts*             (2.5 hours)

• The same fitting used by Specialized's BG Fit staff with the Saxo Bank and Astana Pro Cycling Teams.
• Using Specialized's proprietary Body Geometry D.A.T.A. (Dual Angle Technical Analysis) video capture system, a "Body Geometry 3D" fitting is performed.  The video is used to record and accurately analyze the changes to the rider's position in near real time with amazing accuracy.
• An extensive interview and comprehensive physiological evaluation is conducted to discover rider's history and physiological capabilities.
• Detailed adjustments may be made to cleats; shoes; pedals; seat height and fore/aft, handlebar position; brake/shift lever position with possible recommendations or changes in the type or dimensions of any of the aforementioned parts.
• Focus on improving all aspects of the cycling experience with accuracy and utmost rider confidence.  Includes 30-day comfort guarantee + one return visit.

BG Advanced D.A.T.A. Aero Fitting: $290 + Parts*       (3 hours) 

• The same as the Advanced D.A.T.A Fitting described above; but tailored to the unique needs of the Triathlete and Time Trialist.
• Includes additional adjustments and attention necessary for the aero position.

Level 3 BG 3D Fitting: $150 + Parts* (2 hours)

• A trained bicycle fit technician conducts an extensive interview to discover rider goals, injuries, habits, objectives and comfort issues.
• A comprehensive physiological evaluation and flexibility assessment follows to discover rider limitations and capabilities.
• Detailed on-bike fitting begins with seat height and fore/aft positioning followed by cleat position assessment possible with fore/aft, angular, and rotational adjustment.
• Handlebar position is assessed in detail and adjusted or recommendations made for height, distance from saddle, rotation, and width.  
• Focus on improving all aspects of rider experience on the bike. Includes a 30 day comfort guarantee + one return visit.

Level 3 BG 3D Aero Fitting: $190 + Parts* (2.5 hours)

• The same as the Level 3 fitting; but tailored to the needs of the Triathlete and Time Trialist.
• Includes additional adjustments and attention necessary for the aero position.

Level 2 Fitting: $85 + Parts* (1 hour)

• A trained bicycle fit technician conducts a basic flexibility analysis.
• Rider's on-bike position is then assessed and measured.
• Detailed adjustments to seat height and fore/aft position and handlebar position.
• Focus on improving rider comfort and efficiency especially over longer distances and greater intensities. Includes a 30 day comfort guarantee + one return visit.

Level 1 Fitting: $45 + Parts* (30 minutes)

• Rider assessment by a trained bicycle fit technician on the bike to help find a greater amount of comfort.
• Basic adjustments to seat height, fore/aft position of seat, fine adjustment of handlebar height and distance to seat.
• Focus is on improving rider comfort while improving efficiency.

Ala carte fitting services available:

• Aerobar fitting upcharge: $40

- Because the aero position is an additional handlebar position when compared to bicycles which are not equipped with aerobars.

• Cleat Fitting (includes installation): $65

- Happy with your fit, but have new shoes, pedals, or cleats? We recommend a cleat fitting to be sure that you are not compromising your comfort or efficiency.  The best thing you can do for your knees!

• Existing Fit Transfer: $75

- Have we fitted a bike for you and you are so happy you want your other bike to fit just like it?  For a bike of the similar style - the Existing Fit Transfer is your answer. (Similar style = road bike to road bike, road bike to cyclo-cross bike, mountain bike to mountain bike, etc...)

All other fitting work billed at $85/hour.

*Parts are the recommendation of the fitter and there is no obligation to buy. However, refusal of recommended parts may limit the fitter's ability to meet the objectives of the session. Additional labor charges can be expected for the more complicated installation procedures of some parts and will be offered at a discounted rate.

Occasionally, the dimensional or mechanical aspects of a particular bicycle may limit our ability to create the ideal position for a rider. In these cases, the comfort guarantee may be limited to what is safe and mechanically sound as determined by the fitter or a qualified mechanic.